Sony SRS-X99 Help Manual Download

Page: 75 / 359

Keep the removed grille on a flat surface to prevent distortion.

Note

Do not touch the exposed part of the speaker (speaker units) after removing the speaker grille.

What you can do with the speaker and remote control during playback

You can adjust the volume using the VOL (volume) –/+ buttons of the speaker or the /- buttons of the remote

control.

You can also use the MUTING button,

(Play/Pause) button, and

(Previous/Next) button of the

remote control.

Hint

After SongPal is downloaded and installed to your smartphone/iPhone, you can use it as a remote control.

Note

Sony is not responsible for any loss or damage to data in a USB flash drive that is connected to the speaker.

Do not disconnect a USB flash drive during operation. To prevent damage to data, stop playback, then turn off the

power of the speaker before disconnecting the device.

Sony does not guarantee correct operation when a USB hub or USB extension cable is used.

When you connect a USB flash drive, the speaker starts reading all the data stored on it. Reading files may take

some time.

Operation may become slow depending on the USB flash drive.

Summary of Contents for SRS-X99













































































































































































































































































































































Search results

Summary of Contents for SRS-X99

Reviews:

Related manuals for SRS-X99

Brands by name

Popular brands

Sony SRS-X99, Help Manual

Search results

Summary of Contents for SRS-X99

Reviews:

Related manuals for SRS-X99

Brands by name

Popular brands