Sony SRS-X99 Help Manual Download

Page: 209 / 359

Personal Audio System

SRS-X99

Connecting to a Wi-Fi network using SongPal (iPhone)

You can connect the speaker to a Wi-Fi network using SongPal installed on your iPhone.

First, make a BLUETOOTH connection between the speaker and the iPhone. Then configure the Wi-Fi settings. Wi-Fi

settings in SongPal are sent from your iPhone to the speaker via BLUETOOTH. Complete step 9 within 15 minutes after

turning on the speaker. If the settings are not completed within 15 minutes, the speaker will turn off automatically.

Do the following before starting.

Disconnect the LAN cable (not supplied) from the speaker.

Place the speaker closer to the wireless router.

Set the Wi-Fi antenna on the rear to the upright position.

Before starting this procedure, be aware that the setting information of your Wi-Fi network will not be protected until the

setting is complete. After the setting is complete, the setting information of your Wi-Fi network will be protected again

when you set wireless LAN security.

The specification and design of the application may change without notice.

1. Connect your iPhone to your wireless router.

Connect to the 2.4 GHz band (11b, 11g, 11n) or 5 GHz band (11a, 11n). The speaker is not compatible with IEEE

802.11ac.

2. Search for SongPal at App store and download it on to your iPhone.

SongPal

Help Guide

How to Use

200

Summary of Contents for SRS-X99













































































































































































































































































































































Search results

Summary of Contents for SRS-X99

Reviews:

Related manuals for SRS-X99

Brands by name

Popular brands

Sony SRS-X99, Help Manual

Search results

Summary of Contents for SRS-X99

Reviews:

Related manuals for SRS-X99

Brands by name

Popular brands