Sony SRS-X99 Help Manual Download

Page: 224 / 359

Personal Audio System

SRS-X99

Selecting the Wi-Fi network connection method

Select the appropriate connecting method for your network environment from below.

Do the following before starting.

Disconnect the LAN cable (not supplied) from the speaker.

Place the speaker closer to the wireless router.

Set the Wi-Fi antenna on the rear to the upright position.

Connecting to a Wi-Fi network using SongPal

Download SongPal, to your smartphone or iPhone. This application provides Wi-Fi connection setup with the speaker,

and allows you to select/play music files on a PC via a Wi-Fi network by operating your smartphone/iPhone.

For details, see “

Connecting to a Wi-Fi network using SongPal (Smartphone)

” or “

Connecting to a Wi-Fi network using

SongPal (iPhone)

”

Connecting to a Wi-Fi network using the WPS button of the wireless router

If your wireless router has a WPS button, connect to the Wi-Fi network by this method.

To check if your wireless router is compatible with WPS (Wi-Fi Protected Setup), refer to the operating instructions of

your router. For details, see “

Connecting to a Wi-Fi network using the WPS button of a wireless router

”.

Connecting to a Wi-Fi network using a computer

If your wireless router does not have a WPS button, use your computer to connect the speaker to the Wi-Fi network.

Select one of the connecting methods from below.

Connecting to a Wi-Fi network using a computer connected with a commercially-available LAN cable

For details, see “

Connecting to a Wi-Fi network using a computer connected with a LAN cable

”.

Connecting to a Wi-Fi network using a computer connected wirelessly

The speaker should be initialized to the factory default for this connection.

For details, see “Connecting to a Wi-Fi network using a computer connected wirelessly (

) / (

) / (

) ” or “

Connecting to a Wi-Fi network using a Mac connected wirelessly

”.

Connecting to a Wi-Fi network using an iPhone/iPad/iPod touch

The speaker and your iPhone/iPad/iPod touch can be connected to the same Wi-Fi network. For details, see

“

Connecting to a Wi-Fi network using a iPhone/iPad/iPod touch

”.

Help Guide

How to Use

215

Summary of Contents for SRS-X99













































































































































































































































































































































Search results

Summary of Contents for SRS-X99

Reviews:

Related manuals for SRS-X99

Brands by name

Popular brands

Sony SRS-X99, Help Manual

Search results

Summary of Contents for SRS-X99

Reviews:

Related manuals for SRS-X99

Brands by name

Popular brands