Sony SRS-X99 Help Manual Download

Page: 263 / 359

Personal Audio System

SRS-X99

Connection method 4: Connecting to a Wi-Fi network using an iPhone/iPad/iPod touch

Note that the speaker should be initialized to the factory default for this connection. All BLUETOOTH device registration

(pairing) information is deleted.

The speaker can be connected to the same Wi-Fi network as the iPhone/iPad/iPod touch, if the iPhone/iPad/iPod touch

is iOS 8 or later. The Wi-Fi settings of the speaker is made by the iPhone/iPad/iPod touch.

Do the following before starting.

Disconnect the LAN cable (not supplied) from the speaker.

Place the speaker near the wireless router and the iPhone/iPad/iPod touch.

Set the Wi-Fi antenna on the rear to the upright position.

Make sure that the iPhone/iPad/iPod touch is updated to iOS 8 or later.

1. Connect a iPhone/iPad/iPod touch to the wireless router.

Connect it to 2.4 GHz band (11b, 11g, and 11n) or 5 GHz band (11a and 11n). The speaker is not compatible with

IEEE 802.11ac.

2. With the speaker turned on, tap and hold the VOL (volume) – button and the

(on/standby) button at the same

time for more than 5 seconds.

The power of the speaker turns off automatically. The settings of the speaker return to their factory defaults, and

Help Guide

How to Use

254

Summary of Contents for SRS-X99













































































































































































































































































































































Search results

Summary of Contents for SRS-X99

Reviews:

Related manuals for SRS-X99

Brands by name

Popular brands

Sony SRS-X99, Help Manual

Search results

Summary of Contents for SRS-X99

Reviews:

Related manuals for SRS-X99

Brands by name

Popular brands