Personal Audio System
SRS-X99
Connection method 1: Pairing and connecting with a BLUETOOTH device
The speaker can be paired with up to 9 BLUETOOTH devices.
It is necessary to pair a device with the speaker to be able to make a BLUETOOTH connection for the first time.
Do the following before starting.
Place the BLUETOOTH device within 1 m (3 ft) of the speaker.
Prepare the operating instructions supplied with the BLUETOOTH device for reference.
Stop playback on the BLUETOOTH device to avoid sudden loud sound output from the speaker.
1. Turn on the speaker.
The
(on/standby) indicator lights up in green.
2. Tap the
(BLUETOOTH)
PAIRING button.
The
(BLUETOOTH) indicator begins to flash in white.
When you turn on the speaker for the first time after purchase, pairing information is not stored in the speaker. In
this case, tap the
(BLUETOOTH)
PAIRING button, the
(BLUETOOTH) indicator will begin to flash
quickly in white and the speaker enters pairing mode automatically, then go to step 4.
When you tap the
(BLUETOOTH)
PAIRING button, the speaker tries to make a BLUETOOTH connection
with the last connected BLUETOOTH device. If the device is nearby, the BLUETOOTH connection is established
automatically and the
(BLUETOOTH) indicator stays lit. When you want to connect another BLUETOOTH
device, terminate the current BLUETOOTH connection by operating the currently connected BLUETOOTH
device.
3. Tap and hold the
(BLUETOOTH)
PAIRING button until beeps are heard.
The
(BLUETOOTH) indicator begins to flash quickly in white, and the speaker enters pairing mode.
How to Use
265
