Sony SRS-X99 Help Manual Download

Page: 281 / 359

Personal Audio System

SRS-X99

Listening to music on a device via a BLUETOOTH connection

You can enjoy listening to music of a BLUETOOTH device and operate it via a BLUETOOTH connection if it supports the

following BLUETOOTH profiles.

A2DP (Advanced Audio Distribution Profile)

Enables you to enjoy high-quality audio contents wirelessly.

AVRCP (Audio Video Remote Control Profile)

Enables you to adjust the volume of a BLUETOOTH device, etc.

Operations may vary depending on the BLUETOOTH device. Refer also to the operating instructions supplied with your

BLUETOOTH device.

Note

Make sure beforehand that the volume on the BLUETOOTH device is set to a moderate level to avoid sudden loud

sound output from the speaker.

1. Connect the speaker with the BLUETOOTH device.

The

(BLUETOOTH) indicator lights up in white when the BLUETOOTH connection is established.

2. Adjust the volume with your BLUETOOTH device or the VOL (volume) –/+ button of the speaker.

When you tap the VOL (volume) –/+ button, the

(on/standby) indicator flashes once or three times according

to the volume adjustment.

3. Start playback on the BLUETOOTH device.

To enjoy a more dynamic sound

Help Guide

How to Use

272

Summary of Contents for SRS-X99













































































































































































































































































































































Search results

Summary of Contents for SRS-X99

Reviews:

Related manuals for SRS-X99

Brands by name

Popular brands

Sony SRS-X99, Help Manual

Search results

Summary of Contents for SRS-X99

Reviews:

Related manuals for SRS-X99

Brands by name

Popular brands