Sony SRS-X99 Help Manual Download

Page: 285 / 359

Personal Audio System

SRS-X99

Terminating the BLUETOOTH connection (After use)

When you finish playing music with the BLUETOOTH device, perform any of the following operations to terminate the

BLUETOOTH connection.

Turn off the BLUETOOTH function on the BLUETOOTH device. For details, refer to the operating instructions supplied

with the device.

Turn off the BLUETOOTH device.

Turn off the speaker.

Touch the NFC-compatible device on the N-Mark of the speaker again (if your device has the NFC function).

Hint

If no operation is performed and no music (sound) is input by a BLUETOOTH device for about 15 minutes, the

speaker enters standby mode automatically by the auto standby function, then the BLUETOOTH connection

terminates.

When you finish playing music, the BLUETOOTH connection may terminate automatically, depending on the

BLUETOOTH device.

Summary of Contents for SRS-X99













































































































































































































































































































































Search results

Summary of Contents for SRS-X99

Reviews:

Related manuals for SRS-X99

Brands by name

Popular brands

Sony SRS-X99, Help Manual

Search results

Summary of Contents for SRS-X99

Reviews:

Related manuals for SRS-X99

Brands by name

Popular brands