Sony SRS-X99 Help Manual Download

Page: 33 / 359

Personal Audio System

SRS-X99

Connecting a computer/Installing the driver

You can connect a computer to the USB B port (

B) with a commercially-available USB cable.

To play High-Resolution Audio format files

The speaker is compatible with High-Resolution Audio format (192 kHz/24 bit).

To play High-Resolution Audio format files on your PC with the speaker, you need to download and install "Media Go"

and "Hi-Res Audio Player" to your PC.

1. Connect a computer to the USB B port (

B) with a commercially-available USB cable.

When connecting to Windows PC, the driver is automatically installed. If it is not installed automatically, visit one of

the following websites, and download and install the driver.

For customers in Europe:

http://www.sony.eu/support

For customers in the USA:

http://esupport.sony.com/US

For customers in Canada:

http://esupport.sony.com/CA/

For customers in other countries/regions:

http://www.sony-asia.com/section/support

For details on installing, refer to the download webpages.

Note

Sony does not guarantee correct operation when a USB hub or USB extension cable is used.

Do not disconnect a computer during operation. To prevent damage to data, stop playback and turn off the power of

Help Guide

How to Use

Summary of Contents for SRS-X99













































































































































































































































































































































Search results

Summary of Contents for SRS-X99

Reviews:

Related manuals for SRS-X99

Brands by name

Popular brands

Sony SRS-X99, Help Manual

Search results

Summary of Contents for SRS-X99

Reviews:

Related manuals for SRS-X99

Brands by name

Popular brands