Sony SRS-X99 Help Manual Download

Page: 63 / 359

Personal Audio System

SRS-X99

Using the BLUETOOTH/Network standby function

If the BLUETOOTH/Network standby function is on, the speaker turns on automatically by operating a BLUETOOTH

device or network device, and BLUETOOTH or network connection starts.

When you turn on the speaker in the BLUETOOTH/Network standby mode, the start-up time becomes shorter and the

speaker will become operational sooner, than when you turn on the speaker in standby mode.

1. Turn on the speaker.

The

(on/standby) indicator lights up in green.

2. Tap and hold the

(on/standby) button until the

(on/standby) indicator lights up in orange.

The speaker turns off and enters the BLUETOOTH/Network standby mode.

If you operate a BLUETOOTH device or network device, the speaker turns on automatically and connection starts.

To turn off the BLUETOOTH/Network standby function

With the speaker turned on, tap and hold the

(on/standby) button until the

(on/standby) indicator turns off.

When the

(on/standby) indicator turns off, the BLUETOOTH/Network standby function is turned off and the

speaker enters the standby mode.

Summary of Contents for SRS-X99













































































































































































































































































































































Search results

Summary of Contents for SRS-X99

Reviews:

Related manuals for SRS-X99

Brands by name

Popular brands

Sony SRS-X99, Help Manual

Search results

Summary of Contents for SRS-X99

Reviews:

Related manuals for SRS-X99

Brands by name

Popular brands