Wireless Speaker
SRS-XB12
Terminating the Speaker Add function
To terminate the Speaker Add function, follow the procedure below.
Hint
If a portable audio device, etc. is connected to the AUDIO IN jack, the speaker automatically switches to AUDIO IN mode, and
the Speaker Add function is terminated.
The Speaker Add function will not be terminated even if the speaker is turned off. When the speaker is turned on, the speaker will
try to establish the Speaker Add function with the other speaker that had been connected. If you want to use the Speaker Add
function again, turn on the other speaker within 1 minute.
If you want to use the speaker that had been used as one of the speakers of the Speaker Add function by itself, press the
(power)/
PAIRING button to turn on the speaker, then press and hold the ADD button for about 3 seconds to terminate the
Speaker Add function.
Related Topic
Listening to music wirelessly with 2 speakers (Speaker Add function)
Switching between double mode and stereo mode (Speaker Add function)
4-748-100-11(1) Copyright 2019 Sony Corporation
Press and hold the ADD button for about 3 seconds until a beep is heard.
1
39
