Wireless Speaker
SRS-XB12
Initializing the speaker
If the speaker still does not work properly even after resetting, restore the speaker to the factory default settings by
initializing it.
With the speaker turned on, press and hold the – (volume) button and the
(power)/
PAIRING button at the same
time for more than 5 seconds until the speaker turns off.
The speaker is initialized. Settings such as volume, etc., are restored to the factory default settings, and all pairing
information is deleted.
Note
The speaker cannot be initialized while the power is off.
Related Topic
4-748-100-11(1) Copyright 2019 Sony Corporation
69