Hint
For details on operating your computer, refer to the operating instructions supplied with the computer.
Note
The pairing mode of the speaker is released after about 5 minutes and the (BLUETOOTH) indicator flashes slowly. However, when pairing
information is not stored in the speaker, such as at the factory settings, the pairing mode is not released. If the pairing mode is released before
finishing the process, repeat from step 2.
Once the BLUETOOTH devices are paired, there is no need to pair them again, except in the following cases:
Pairing information has been deleted after repair, etc.
The speaker is already paired with eight devices and another device is to be paired.
The speaker can be paired with up to eight devices. If a new device is paired after eight devices have already been paired, the paired device
with the oldest connection time is replaced by the new one.
When the pairing information of the speaker has been deleted from the BLUETOOTH device.
When the speaker is initialized, all the pairing information is deleted.
The speaker can be paired with multiple devices, but can only play music from one paired device at a time.
When an audio cable is connected to the speaker’s AUDIO IN jack while the speaker and the BLUETOOTH device have been connected via
BLUETOOTH connection, sound from the BLUETOOTH-connected device is not output from the speaker (the hands-free function is available). To
listen to music from the BLUETOOTH device, disconnect the audio cable from the speaker's AUDIO IN jack.
Related Topic
Connecting with a paired computer (Windows 8)
How to make a wireless connection with BLUETOOTH devices
Listening to music of a device via BLUETOOTH connection
4-587-625-11(2) Copyright 2016 Sony Corporation
Check that the (BLUETOOTH) indicator has switched from flashing to a steady light.
When the speaker is connected to the computer, the (BLUETOOTH) indicator stays lit. You can enjoy playing back music
from your computer.
If a connection cannot be made, despite [SRS-XB2] appearing on the screen, initiate pairing mode on the speaker.
Press and hold the (BLUETOOTH)
PAIRING button until you hear beeps and the (BLUETOOTH) indicator begins
to flash quickly in white.
5
31
