Wireless Speaker
SRS-XB402M
Pairing and connecting with BLUETOOTH devices
When pairing with two or more BLUETOOTH devices, perform the following pairing procedure for each device.
Before operating the speaker, be sure to do the following:
Place the BLUETOOTH device within 1 m (3.2 ft) from the speaker.
Connect the speaker to an AC outlet via the AC adaptor (supplied) or charge the built-in battery sufficiently.
To avoid any sudden loud sound output from the speaker, turn down the volume of the BLUETOOTH device that you
connect with the speaker, or stop playback on the device.
Depending on the paired BLUETOOTH device, the volume of the BLUETOOTH device may be synchronized with the
volume of the speaker when you start playing music after a BLUETOOTH connection is established.
Press and hold the
(power)/
PAIRING button for about 3 seconds until the speaker beeps and the
(BLUETOOTH) indicator flashes quickly in blue.
The speaker enters pairing mode.
1
Perform the pairing procedure on the BLUETOOTH device to detect the speaker.
When a list of detected devices appears on the display of the BLUETOOTH device, select the speaker you set up
for the Wi-Fi connection.
2 devices with the same name may appear on the display of the BLUETOOTH device. If this occurs, try connecting
to both.
If passkey* entry is prompted on the BLUETOOTH device, enter “0000.”
2
A passkey may also be called “Passcode,” “PIN code,” “PIN number” or “Password.”
*
Follow the instructions on the BLUETOOTH device screen to establish a BLUETOOTH connection.
When the BLUETOOTH connection is established, the speaker beeps and the
(BLUETOOTH) indicator stops
flashing and stays lit.
3
19
