Wireless Speaker
SRS-XB402M
Connecting with a computer via a BLUETOOTH connection (Mac)
Pairing is the process required to mutually register the information on BLUETOOTH devices to be connected wirelessly.
It is necessary to pair a device with the speaker to be able to make a BLUETOOTH connection for the first time. Perform
the same procedures to pair to other devices.
Supported operation systems
macOS High Sierra (version 10.13)
Do the following before starting.
Place your computer within 1 m (3.2 ft) of the speaker.
Connect the speaker to an AC outlet via the AC adaptor (supplied) or a USB AC adaptor (commercially available), or
charge the built-in battery sufficiently.
Prepare the operating instructions supplied with the computer for reference.
To avoid any sudden loud sound output from the speaker, turn down the volume of the computer and speaker that
you connect with each other, or stop playback.
Set the speaker of your computer to on.
If the speaker of your computer is set to
(mute), sound does not output on the BLUETOOTH speaker.
When the speaker of your computer is set to on:
Turn on the speaker.
The
(power) indicator lights up in white
*1
.
1
Depending on the Sound Mode, the color of the
(power) indicator varies. For details, refer to the following topic.
*1
Press and hold the
(power)/
PAIRING button for about 3 seconds until the speaker beeps and the
(BLUETOOTH) indicator starts flashes quickly in blue.
The speaker enters pairing mode.
2
29
