Sony SRS-ZR5 Help Manual Download

Page: 145 / 261

Help Guide

Personal Audio System

SRS-ZR5

Switching devices by one touch (NFC)

If you move an NFC-compatible device over the N-Mark part of the speaker while the speaker is connected with another

BLUETOOTH device, the speaker disconnects from the BLUETOOTH device. The speaker then connects with the NFC-

compatible device that was just touched.

When an NFC-compatible device is connected with the speaker via the BLUETOOTH connection, it will disconnect from the

speaker if you touch the device onto another NFC-compatible BLUETOOTH headset or BLUETOOTH speaker. The device

then connects with the BLUETOOTH headset or BLUETOOTH speaker it has just touched.

When connecting your NFC-compatible device with using the NFC function, be careful not to touch the FUNCTION button and

-/+ (volume) buttons at the same time with the device.

129

Summary of Contents for SRS-ZR5




























































































































































































































































Search results

Summary of Contents for SRS-ZR5

Reviews:

Related manuals for SRS-ZR5

Brands by name

Popular brands

Sony SRS-ZR5, Help Manual

Search results

Summary of Contents for SRS-ZR5

Reviews:

Related manuals for SRS-ZR5

Brands by name

Popular brands