Sony SRS-ZR5 Help Manual Download

Page: 236 / 261

Help Guide

Personal Audio System

SRS-ZR5

No sound/Sound from only one speaker/Low sound level

Check that both the speaker and the connected device are turned on.

Check that the volume of both the speaker and the connected device are not too low.

Check that music is playing back on the connected device.

If the device is connected to the AUDIO IN jack, check that both stereo mini plugs of the audio cable are firmly inserted into

the speaker and the connected device.

If the device that is connected to the AUDIO IN jack is monaural, sound will only be output from the left speaker.

Keep the speaker away from metal objects.

220

Summary of Contents for SRS-ZR5




























































































































































































































































Search results

Summary of Contents for SRS-ZR5

Reviews:

Related manuals for SRS-ZR5

Brands by name

Popular brands

Sony SRS-ZR5, Help Manual

Search results

Summary of Contents for SRS-ZR5

Reviews:

Related manuals for SRS-ZR5

Brands by name

Popular brands