Sony SRS-ZR5 Help Manual Download

Page: 245 / 261

Personal Audio System

SRS-ZR5

The speaker cannot connect to music services

Make sure the wireless router/access point is turned on.

When the speaker is connected to a Wi-Fi network, place the wireless router/access point and the speaker closer together and

perform the setup again.

Depending on the provider, only one connection to the Internet may be allowed. In that case, the speaker will not be able to

connect if the connection is currently occupied. Please consult your carrier or service provider.

Turn your smartphone, iPhone, etc. off for a short period, turn it on again, then restart the SongPal application.

Check that the enabled music application is installed in the smartphone, iPhone, etc.

229

Summary of Contents for SRS-ZR5




























































































































































































































































Search results

Summary of Contents for SRS-ZR5

Reviews:

Related manuals for SRS-ZR5

Brands by name

Popular brands

Sony SRS-ZR5, Help Manual

Search results

Summary of Contents for SRS-ZR5

Reviews:

Related manuals for SRS-ZR5

Brands by name

Popular brands