Sony SRS-ZR5 Help Manual Download

Page: 256 / 261

Personal Audio System

SRS-ZR5

There is noise, skipping, or distorted sound

An unsupported USB device is connected. Refer to the URL in “Compatible USB devices” and use a supported USB device.

Turn off the speaker, reconnect the USB device, then turn on the speaker.

The music data itself contains noise, or the sound is distorted. Noise contained in the music may be transferred. In this case,

delete the music file from the USB device and copy the original music file again to the USB device. If noise or distorted sound

occurs in the same playback position each time, the music data may be corrupted.

The bit rate used when encoding files was too low. In this case, delete the music file from the USB device and copy the

original music file again at a higher bit rate to the USB device.

Related Topic

Compatible USB devices

240

Summary of Contents for SRS-ZR5




























































































































































































































































Search results

Summary of Contents for SRS-ZR5

Reviews:

Related manuals for SRS-ZR5

Brands by name

Popular brands

Sony SRS-ZR5, Help Manual

Search results

Summary of Contents for SRS-ZR5

Reviews:

Related manuals for SRS-ZR5

Brands by name

Popular brands