Sony SRS-ZR5 Help Manual Download

Page: 29 / 261

Hint

If you want to set a fixed IP address, set in the screen in step

above.

When the connection of the speaker to your Wi-Fi network has completed, connect your PC to the previous destination or your wireless router.

Note

This procedure needs to be completed within 30 minutes. If you cannot complete within 30 minutes, start over from step

Until you finish the Wi-Fi network setting, it will not be protected. The Wi-Fi network will be protected again after setting the Wi-Fi security.

When you connect the speaker to a Wi-Fi network for the first time after purchase, the BLUETOOTH/Network standby mode is turned on
automatically.

Check that the LINK indicator lights up in orange.

When the Wi-Fi connection is completed, the LINK indicator lights up in orange. It may take more than a minute for the LINK

indicator to light up.

The connection is complete.

Connect the PC to the wireless router to be used.

Summary of Contents for SRS-ZR5




























































































































































































































































Search results

Summary of Contents for SRS-ZR5

Reviews:

Related manuals for SRS-ZR5

Brands by name

Popular brands

Sony SRS-ZR5, Help Manual

Search results

Summary of Contents for SRS-ZR5

Reviews:

Related manuals for SRS-ZR5

Brands by name

Popular brands