Sony SRS-ZR5 Help Manual Download

Page: 32 / 261

The power of the speaker turns off automatically. The settings of the speaker return to their factory defaults, and network

settings and all BLUETOOTH device registration (pairing) information are deleted.

Turn on the speaker.

Search for the speaker on the iPhone/iPod touch.

Tap [Settings].

Tap [SRS-ZR5] from the list.

Perform the Wi-Fi network settings on the iPhone/iPod touch.

Follow the instructions on the screen.

Check that the LINK indicator lights up in orange.

When the speaker is connected to the same Wi-Fi network as the iPhone/iPod touch, the LINK indicator lights up in orange.

It may take more than a minute for the LINK indicator to light up.

Summary of Contents for SRS-ZR5




























































































































































































































































Search results

Summary of Contents for SRS-ZR5

Reviews:

Related manuals for SRS-ZR5

Brands by name

Popular brands

Sony SRS-ZR5, Help Manual

Search results

Summary of Contents for SRS-ZR5

Reviews:

Related manuals for SRS-ZR5

Brands by name

Popular brands