Sony SRS-ZR5 Help Manual Download

Page: 135 / 261

Personal Audio System

SRS-ZR5

Pairing and connecting with a PC (Windows 7)

Pairing is the process required to mutually register the information on BLUETOOTH devices to be connected wirelessly.

It is necessary to pair a device with the speaker to be able to make a BLUETOOTH connection for the first time. Perform same

procedures to pair to other devices.

Do the following before starting.

Make sure that your PC has the BLUETOOTH wireless function.

Place your PC within 1 m (3 ft) of the speaker.

Locate the operating instructions supplied with the PC for reference.

Turn down the volume of the PC.

Stop playback on the PC to avoid any sudden loud sound from the speaker.

Activate the BLUETOOTH function on your PC. For details how to activate the BLUETOOTH function or to confirm that your

PC has the BLUETOOTH function, refer to the operating instructions of the PC.

Set the speaker on the PC to on. If the speaker setting on the PC is the mute (off) mode, the speaker does not output sound.

If the speaker setting on the PC is the mute (off) mode

If the speaker setting on the PC is the on mode

Turn the speaker on.

The (power) indicator lights up in green.

Tap the FUNCTION button repeatedly until the BLUETOOTH indicator flashes.

The speaker enters the BLUETOOTH mode.

119

Summary of Contents for SRS-ZR5




























































































































































































































































Search results

Summary of Contents for SRS-ZR5

Reviews:

Related manuals for SRS-ZR5

Brands by name

Popular brands

Sony SRS-ZR5, Help Manual

Search results

Summary of Contents for SRS-ZR5

Reviews:

Related manuals for SRS-ZR5

Brands by name

Popular brands