Sony SRS-ZR5 Help Manual Download

Page: 157 / 261

Personal Audio System

SRS-ZR5

Setting your PC as a DLNA server and controller (Windows 8.1)

Windows 8.1 supports DLNA1.5. A Windows 8.1 PC can be used as both a DLNA server and controller.

By operating from a Windows 8.1 PC, you can enjoy music stored in a DLNA server (including a Windows 8.1 PC) on your home

network with the speaker if you set the following.

If you download SongPal to your smartphone, iPhone, etc. and operate a Windows 8.1 PC, perform "

Setting your PC for operating

from a smartphone, iPhone, etc. as a controller (Windows 8.1)

Move the mouse pointer to the top-right (or bottom-right) corner of the screen to display the charms,

then select [Settings].

In the case of a touch panel, display the charms by swiping from the right side of the screen to the center, then select

[Settings].

Select [Change PC settings].

141

Summary of Contents for SRS-ZR5




























































































































































































































































Search results

Summary of Contents for SRS-ZR5

Reviews:

Related manuals for SRS-ZR5

Brands by name

Popular brands

Sony SRS-ZR5, Help Manual

Search results

Summary of Contents for SRS-ZR5

Reviews:

Related manuals for SRS-ZR5

Brands by name

Popular brands