Sony SRS-ZR5 Help Manual Download

Page: 228 / 261

Personal Audio System

SRS-ZR5

Notes on software

Notes on the License

This speaker contains software that Sony uses under a licensing agreement with the owner of its copyright. We are obligated to

announce the contents of the agreement to customers under requirement by the owner of copyright for the software.

Please read the contents of the license described in “

Important information on software

.”

Notice on GNU/GPL/LGPL applied software

This speaker contains software that is subject to the following GNU General Public License (hereinafter referred to as “GPL”) or

GNU Lesser General Public License (hereinafter referred to as “LGPL”). These establish that customers have the right to acquire,

modify, and redistribute the source code of said software in accordance with the terms of the GPL or LGPL supplied. The source

code for the above-listed software is available on the Web.

To download, please access the following URL then select the model name “SRS-ZR5”.

URL:

http://oss.sony.net/Products/Linux/

Please note that Sony cannot answer or respond to any inquiries regarding the content of the source code.

Notes on the update

If you use the speaker while connected to the Internet via a Wi-Fi network or wired network, the speaker can update to the latest

software automatically.

By updating the software, new features will be added enabling you to experience more convenient and stable use.

If you do not want to automatically update the software, you can disable this function by using the SongPal installed on your

smartphone, iPhone, etc.

However, the software may be updated automatically for stable use, etc., even if you disable this function. Also, if you disable this

function, you can still update the software manually.

For details about how to set and operate, see “

Updating the pre-installed software

.” The speaker may not be operational while

updating.

Disclaimer regarding services offered by third parties

Services offered by third parties may be changed, suspended, or terminated without prior notice. Sony does not bear any

responsibility in these sorts of situations.

212

Summary of Contents for SRS-ZR5




























































































































































































































































Search results

Summary of Contents for SRS-ZR5

Reviews:

Related manuals for SRS-ZR5

Brands by name

Popular brands

Sony SRS-ZR5, Help Manual

Search results

Summary of Contents for SRS-ZR5

Reviews:

Related manuals for SRS-ZR5

Brands by name

Popular brands