Sony SRS-ZR5 Help Manual Download

Page: 238 / 261

Personal Audio System

SRS-ZR5

The speaker cannot connect to the network (Other equipment on the network

cannot find or recognize the speaker)

It takes about 1 minute for the speaker to acquire an IP address when it is turned on in a communication environment without

a router.

If you use a fixed IP address, the same IP address might be already in use by other equipment. Therefore, use a different IP

address.

There is more than one home network. The PC and smartphone are connected to a different network than the speaker’s.

If the settings are correct, try the following.

Turn off the wireless router/access point, wait a while and turn on the power again.

Turn off the speaker, wait a while and turn on the power again.

222

Summary of Contents for SRS-ZR5




























































































































































































































































Search results

Summary of Contents for SRS-ZR5

Reviews:

Related manuals for SRS-ZR5

Brands by name

Popular brands

Sony SRS-ZR5, Help Manual

Search results

Summary of Contents for SRS-ZR5

Reviews:

Related manuals for SRS-ZR5

Brands by name

Popular brands