Sony SRS-ZR5 Help Manual Download

Page: 31 / 261

Personal Audio System

SRS-ZR5

Connecting to a Wi-Fi network using an iPhone/iPod touch

Note that the speaker should be initialized to the factory default for this connection. All BLUETOOTH device registration (pairing)

information is deleted. To use the BLUETOOTH connection after that, delete all pairing information on the iPhone/iPod touch, and

then set pairing again.

If the iPhone/iPod touch is iOS 8 or later, the speaker can be connected to the same Wi-Fi network. The Wi-Fi network settings of

the speaker are made by the iPhone/iPod touch.

Do the following before starting.

Disconnect the LAN cable (not supplied) from the speaker.

Place the speaker near the wireless router and the iPhone/iPod touch.

Make sure that the iPhone/iPod touch is updated to iOS 8 or later.

Connect an iPhone/iPod touch to the wireless router.

Connect it to 2.4 GHz band (11b, 11g, and 11n) or 5 GHz band (11a and 11n). The speaker does not support IEEE

802.11ac.

With the speaker turned on, press and hold the – (volume) button and the (power)/ PAIRING button

at the same time for more than 4 seconds to initialize the settings of the speaker.

Summary of Contents for SRS-ZR5




























































































































































































































































Search results

Summary of Contents for SRS-ZR5

Reviews:

Related manuals for SRS-ZR5

Brands by name

Popular brands

Sony SRS-ZR5, Help Manual

Search results

Summary of Contents for SRS-ZR5

Reviews:

Related manuals for SRS-ZR5

Brands by name

Popular brands