Sony SRS-ZR5 Help Manual Download

Page: 43 / 261

Personal Audio System

SRS-ZR5

What you can do with the speaker

Music playback via a wireless connection (DLNA/BLUETOOTH)

Music service support

Music services and their period of availability may differ. An update of the speaker may be required. Services offered by third

parties may be changed, suspended, or terminated without prior notice. Sony does not bear any responsibility for such

situations.
BLUETOOTH supported codec

: SBC (Subband Codec) / AAC (Advanced Audio Coding) / LDAC

By connecting the speaker to a HDMI port supported with ARC on a TV via a HDMI cable (not supplied), you can listen to TV

sound from the speaker.

The USB port supports playback from a USB flash drive.
Easy operation from your smartphone and tablet

Compatible with DSEE

Compatible with Cle

Tap operation

Audio signal compression and conversion format

Only when SongPal is installed on your device

Summary of Contents for SRS-ZR5




























































































































































































































































Search results

Summary of Contents for SRS-ZR5

Reviews:

Related manuals for SRS-ZR5

Brands by name

Popular brands

Sony SRS-ZR5, Help Manual

Search results

Summary of Contents for SRS-ZR5

Reviews:

Related manuals for SRS-ZR5

Brands by name

Popular brands