SRS-ZR7
12
2-4. LOUDSPEAKER (62 mm) (SP2, SP3) (SUBWOOFER)
,QVWDOODWLRQGLUHFWLRQIRUWKHORXGVSHDNHUPP6363
Note 1:
When installing the loudspeaker (62 mm) (SP2, SP3),
make sure that there is a position of the speaker terminal to
the position shown in the figure below.
top side
–
)URQWYLHZ
–
terminals position
1
four screws
(BTTP
M2.6
u
8)
1
four screws
(BTTP
M2.6
u
8)
2
loudspeaker (62 mm) (R-ch)
(subwoofer)
(SP3)
(See Note 2)
2
loudspeaker (62 mm) (L-ch)
(subwoofer)
(SP2)
(See Note 2)
Do not touch.
Note 2:
Do not touch the areas of
the speaker unit as figure
below.
right side
top side
NOTE OF REPLACING THE LOUDSPEAKER (45 mm)
The loudspeaker (45 mm) (Ref. No. SP1, SP4) has been changed in the midway of production.
When replacing the loudspeaker (45 mm), be sure to follow the contents below and replace correctly.
Procedure:
1. Check the Part No. that has been written on the rear side of the loudspeaker (45 mm).
“1-859-171-11” or
“1-859-171-12” or
“1-859-171-13”
Xxxxxxxxxxxxxxxx
XX XX XX XX
Malaysia
– Rear view –
2. Refer to the table below, and replace according to the contents of the replacing method corresponding to the Part No. that has checked
in step 1.
Part No.
Replacing method
1-859-171-11
Left and right at the same time, replace to 1-859-171-12 or 1-859-171-13.
(Be sure to use the same parts with left and right)
1-859-171-12
Replace the speaker of side that has been damaged with 1-859-171-12.
1-859-171-13
Replace the speaker of side that has been damaged with 1-859-171-13.
Ver. 1.2
Summary of Contents for SRS-ZR7
Page 6: ...SRS ZR7 6 MEMO ...
Page 8: ...SRS ZR7 8 MEMO ...
