3-32
SRW-5000/5500
[F7]
(CAP REEL) key
This menu checks the following items by performing the same operations as the
adjusting menus from the
[F3]
(S REEL FG) to
[F9]
(T REEL TORQUE).
.
If automatic adjustment is possible in each menu of the
[F3]
(S REEL FG) to
[F9]
(T REEL TORQUE).
.
If the adjustment data value obtained by the automatic adjustment is proper.
n
After exiting this menu, the adjustment data value will be returned to the original
value.
When actually performing the adjustment, execute the adjusting menu.
1.
Press the
[F7]
(CAP REEL) key of the ALT SERVO CHECK menu to display
the CAPSTAN REEL CHECK menu.
2.
Press the
[SET]
key.
.
When the
[SET]
key is pressed, checking will be started.
.
The message “Auto Checking...” will be displayed on the color display.
3.
Check the checking result.
.
When checking completes with no errors, the message “All OK!!” will be
displayed on the color display.
.
When checking could not be performed or the displays of NG items are
displayed, refer to “For Automatic Adjustment Failure” on page 3-75.
4.
To finish the check, press the
[F10]
(EXIT) key.
5.
Press the
[F10]
(EXIT) key while pressing the
[SFT]
(SHIFT) key.
6.
Press the
[F10]
(EXIT) key after the message “Check Complete” is displayed to
return to the ALT SERVO CHECK menu.
F1
F2
F3
F4
DIAG
ALT
F5
F6
F7
F8
F9
F10
DRUM
MOTOR
REEL
SHIFT
T REEL
BRAKE
EXIT
ALT SERVO CHECK MENU
PINCH
PLG
S REEL
BRAKE
CLEAN
PLG
CAP
REEL
CAPSTAN REEL CHECK
Press SET key.
ALT SERVO CHECK MENU
CAPSTAN FG DUTY
Auto Checking. . .
ALT SERVO CHECK MENU
Auto Check Complete
ALL OK!!
[SET]
(omitted)
