1-2
SRW-5000/5500
Upper lid (front)
assembly
Fixing screw
Fixing screw
BVTT3
x
6
A
B
BVTT3
x
6
Bottom plate
Hooks
Hooks
4.
Fully loosen the two fixing screws.
5.
Remove the upper lid (rear) assembly by moving in
the direction indicated by the arrow.
When reattaching, install in the reverse order of removal.
n
Tighten the fixing screws as following torque.
Tightening torque: 120
x
10
_
2
N
.
m {12.0 kgf
.
cm}
1-3-2. Removing/Reattaching Bottom Plate
1.
Place the unit with the side facing down.
2.
Remove the two screws securing the bottom plate.
3.
Slide the bottom plate in the arrow A direction to
unhook, the four hooks.
4.
Remove the bottom plate in the arrow B direction.
When reattaching, install in the reverse order of removal.
