Home Audio System
MHC-V90DW
Connecting to a wired network
This section explains how to connect the home audio system to a wireless router with a LAN cable (not supplied), then
how to connect the router to the PC.
Usually the DHCP setting is set to ON when you connect your PC to the network.
Do the following before starting.
Set the DHCP setting of your PC to ON.
Check that your PC and wireless router are turned on.
1
Connect the wireless router to the LAN port of the home audio system with a LAN cable (not supplied).
2
Connect the wireless router to your PC using another LAN cable (not supplied), or a Wi-Fi connection.
3
Turn the home audio system on.
The power indicator lights up in green, then the NETWORK indicator begins to flash in white. Wait about 2 minutes
(in some cases, 4 or 5 minutes) until
lights up on the display. When the connection is completed, the
NETWORK indicator changes from flashing to staying lit in white.
4
29
Summary of Contents for SS-V90DW
Page 10: ...10 ...
Page 18: ...4 694 845 31 2 Copyright 2017 Sony Corporation 18 ...