129
US
Us
in
g the
Re
m
o
te
Con
tr
o
l
2
While the RM SET UP button is
flashing, press the input button
(including the TV button) of the
equipment you want to control.
For example, if you are going to control a
VCR connected to VIDEO 1 IN jack,
press VIDEO 1.
RM SET UP and SHIFT light up, and the
input button flashes.
If you press the button for an equipment
of which you cannot program the remote
control, such as TUNER, PHONO, or
SOURCE, etc., the RM SET UP button
keeps flashing.
3
Press the numeric buttons to
enter the numeric code.
The input button lights up.
If more than one code exists, trying
entering the first one which corresponds
to the equipment.
Note
Only the codes in the 500’s are valid for the TV
button.
4
Press ENT/MEM.
Once the numeric code has been verified,
the RM SET UP button flashes twice and
the remote control automatically exits the
programming mode. The input button
also turns off.
To cancel programming
Press RM SET UP during any step.
Use the numeric codes in the tables below to
program non-Sony equipment and also Sony
equipment that the remote control is initially
unable to operate. Since the signal from the
remote control received by the equipment
differs by its model and the year, more than
one numeric code may be assigned to an
equipment. If you fail to program your remote
control using one of the codes, try using other
codes.
Notes
• The numeric codes are based on the latest
information available for each brand. There is a
chance, however, that your equipment will not
respond to some or all of the codes.
• All of the input buttons on this remote control may
not be available when used with your particular
equipment.
To control a CD player
To control a DAT deck
To control a tape deck
The numeric codes
corresponding to the equipment
and the maker of the equipment
Maker
Code(s)
SONY
101, 102, 103
DENON
104, 123
JVC
105, 106, 107
KENWOOD
108, 109, 110
MAGNAVOX
111, 116
MARANTZ
116
ONKYO
112, 113, 114
PANASONIC
115
PHILIPS
116
PIONEER
117
TECHNICS
115, 118, 119
YAMAHA
120, 121, 122
Maker
Code(s)
SONY
203
PIONEER
219
Maker
Code(s)
SONY
201, 202
continued
