118
GB
Clearing all the contents
of the remote’s memory
1
Press RM SET UP.
The set up list appears.
2
Move the easy scroll key to
select “ALL CLEAR,” then
press the key to enter the
selection.
The ALL CLEAR list appears.
3
Move the easy scroll key to
select “Yes,” then press the key
to enter the selection.
“CLEAR OK?!” appears.
4
Move the easy scroll key to
select “Yes” again, then press
the key.
All the contents of the remote’s memory
(i.e., all the programmed data) are
cleared.
Other operations
You can set the remote to display only the
inputs you use in the input list.
1
Press RM SET UP.
The set up list appears.
2
Move the easy scroll key to
select “INPUT LIST,” then press
the key to enter the selection.
The INPUT LIST list appears.
A “
*
” in front of the input name means
that the input is displayed in the input list.
3
Move the easy scroll key to
select an input that will not be
displayed in the input list, then
press the key to enter the
selection.
“
*
” disappears for the selected input.
To display the input in the input
list
In step 3, press the key repeatedly until “
*
”
appears again.
1
2,3,
4
Customizing the input list
1
2,3
