42
GB
Receiving Br
oadcasts
Brief descriptions of buttons used to
receive broadcasts
PRESET /– buttons:
Press to scan all preset
radio stations.
DISPLAY button:
Press to display the RDS information.
MEMORY button:
Uses for memorizing preset stations.
TUNING/PTY /– buttons:
Press to scan all
available radio stations or select program types.
FUNCTION control:
Rotate to select the tuner.
EON button:
Press to set the receiver to switch stations
automatically.
PTY button:
Press to scan preset stations by the program
type.
FM MODE button:
If “STEREO” flashes in the display
and the FM stereo reception is poor, press this button to
improve the sound. You will not be able to enjoy stereo
effect but the sound will be less distorted.
Note
If “STEREO” does not appear at all even when the FM broadcast
is received normally, press this button to turn on the “STEREO”
indication.
FM/AM button:
Press to select the FM or AM band.
SHIFT button:
Press to select a memory page (A, B, or C)
for presetting radio stations or tuning to preset stations.
Storing FM Stations
Automatically
(AUTOBETICAL)
This function lets you store up to 30 FM and FM RDS
stations in alphabetical order without redundancy.
Additionally, it only stores the stations with the clearest
signals.
If you want to store FM or AM stations one by one, see
“Presetting radio stations” on page 44.
For details on the buttons used in this section, see “Brief
descriptions of buttons used to receive broadcasts” on this
page.
1
Press
1/u
to turn off the receiver.
2
Hold down MEMORY and press
1/u
to turn the
receiver back on.
“Autobetical select” appears in the display and the
receiver scans and stores all the FM and FM RDS
stations in the broadcast area.
For RDS stations, the tuner first checks for stations
broadcasting the same program, then stores only the
one with the clearest signal. The selected RDS stations
are sorted alphabetically by their Program Service
name, then assigned a two character preset code. For
more details on RDS see page 45.
Regular FM stations are assigned two character preset
codes and stored after the RDS station.
When done, “Autobetical finish” appears in the
display momentarily and the receiver returns to
normal operation.
Notes
• Do not press any of the buttons on the receiver or supplied
remote during autobetical operation.
• If you move to another area, repeat this procedure to store
stations in your new area.
• For details on tuning the stored stations, see page 44.
• The FM MODE setting is also stored along with the station.
• If you move the antenna after storing stations with this
procedure, the stored settings may no longer be valid. If this
happens, repeat this procedure to store the stations again.
5
0
1
3
9
7
4
6
2
8
10
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
PHONES
SPEAKERS
A
OFF
A
+
B
B
MASTER VOLUME
SHIFT
FM/AM
– +
DOOR OPEN
PRESET TUNING
VIDEO 3 INPUT
R
L
VIDEO
S-VIDEO
AUDIO
VIDEO 1
FM MODE
BASS BOOST
5.1CH INPUT
EQUALIZER
INPUT MODE
SOUND FIELD
A.F.D.
MODE
2CH
MODE
2CH
BASS BOOST
A.F.D.
MEMORY
VIDEO 2
VIDEO 3
TAPE
MD/DAT
CD
TUNER
PHONO
MULTI CHANNEL DECODING
SUR
LEVEL
EQ
DIMMER
DISPLAY
+
–
•
•
•
•
SET UP
NAME
ENTER
MODE
FUNCTION
MUTING
PTY
EON
– PTY SELECT +
TUNING/
RDS
DVD
TV/LD
TUNING/PTY /–
DISPLAY
PRESET /–
FUNCTION
FM MODE
PTY
EON
SHIFT
MEMORY
FM/AM