20
GB
Hooking Up and Setting Up the Speaker System
Before turning on the receiver
Make sure that you have:
• Selected the appropriate front speakers (see “
7
SPEAKERS selector” on page 23).
Checking the connections
After connecting all of your components to the receiver,
do the following to verify that the connections were made
correctly.
1
Press
?
/
1
to turn on the receiver.
2
Press a function button to select a component
(program source) that you connected (e.g., CD
player or tape deck).
3
Turn on the component and start playing it.
4
Rotate MASTER VOLUME to turn up the volume.
If you do not obtain normal sound output after
performing this procedure, look for the reason in the
checklist on the following page and take the appropriate
measures to correct the problem.
Before You Use Your
Receiver
Multi Channel Surround Setup
Notes
• The front balance, rear balance, center level, and rear level are
shown in the display during adjustment.
• Although these adjustments can also be made via the front
panel using the LEVEL menu (when the test tone is output, the
receiver switches to the LEVEL menu automatically), we
recommend you follow the procedure described above and
adjust the speaker levels from your listening position using the
remote control.
z
When setting the volume levels for each speaker
Let’s assume that you have matched the sound levels of all the
speakers using the test tone. Although this lays the foundation
for high quality surround sound, it may be necessary to make
further adjustments while listening to playback of actual
software. This is because most software contains center and rear
channels recorded at slightly lower levels than the two front
channels.
When you actually play back software recorded in multi channel
surround, you will notice that increasing the center and rear
speaker levels produces a better blend between the front and
center speakers and greater cohesion between the front and rear
speakers. Increasing the level of the center speaker about 1 dB,
and the rear speakers about 1~2 dB is likely to produce better
results.
In other words, in order to create a more cohesive soundstage
with balanced dialog, we recommend that you make some
adjustments while playing your software. Changes of only 1 dB
can make a huge difference in the character of the soundstage.
Function buttons
MULTI CHANNEL DECODING
MASTER VOLUME
DISPLAY
INPUT MODE
VIDEO
MD/TAPE
CD
TUNER
AUX
DVD/LD
TV/SAT 5.1CH INPUT
CINEMA STUDIO
LEVEL
I
–
i
+
SET UP
BASS BOOST
TONE
FM/AM
MUTING
TONE
BASS
BOOST
SHIFT
MEMORY
FM MODE
PRESET
– TUNING +
– TUNING +
NAME
ENTER
SUR
BASS/
TREBLE
SOUND FIELD
A. F. D.
A
B
C
2CH
MODE
DIMMER
SPEAKERS
R
ON
r
OFF
A
PHONES
B
?
/
1
MASTER VOLUME
1/u
04/12-21_STR-DE545.34GB
7/15/03, 9:24 AM
20
Summary of Contents for STR-DE545
Page 51: ...2CT 0 0 0 0 pçåó 02 02 03_STR DE545 34CT 10 7 03 1 56 pm 2 ...
Page 97: ...48CT E JPF RKN MKN S JP P pçåó 09 44 50_STR DE545 34CT 10 7 03 3 14 pm 48 ...
Page 100: ...2CS 0 0 pçåó 02 02 03_STR DE545 34CS 14 7 03 5 08 pm 2 ...
Page 149: ...Sony Corporation Printed in Malaysia 09 44 51_STR DE545 34CS 15 7 03 9 12 am 51 ...
