Using Surround Sound
18
EN
Getting the Most Out of Dolby
Pro Logic Surround Sound
To obtain the best possible Dolby Pro Logic Surround
sound, first select the center mode according to your
speaker system. Then, adjust the sound parameters of
the PRO LOGIC sound field.
Note that you must have at least one additional pair of
speakers and/or one center speaker to do the following
adjustments.
Remote
CENTER
LEVEL (+/–)
TEST TONE
REAR
LEVEL (+/–)
DIGITAL
PROCESSING
CONTROL
DPC MODE
MODE
SOUND FIELD
ON/OFF
GENRE
TONE
ON/OFF
DPC
MODE
GENRE
MODE
SOUND FIELD
ON/OFF
Digital processing
control buttons
CENTER MODE
SUR indicator
0
)
=
+
9
(
p
P
r
Selecting the center mode
The receiver offers you four center modes:
PHANTOM, 3 CHANNEL LOGIC, NORMAL, and
WIDE. Each mode is designed for a different speaker
configuration. Select the mode that best suits your
speaker system configuration.
1
Press SOUND FIELD ON/OFF to turn on the
sound fields.
2
Press GENRE to select the PRO LOGIC sound
field.
3
Press CENTER MODE repeatedly until the center
mode you want appears in the display. Select the
center mode by referring to the following chart.
If you have
Front and rear
speakers, no
center speaker
Front and center
speakers, no rear
speaker
Front and rear
speakers, and a
small center
speaker
Front and rear
speakers, and a
center speaker
equivalent to your
front speakers
So that
The sound of the
center channel is
output from the front
speakers.
The sound of the rear
channel is output
from the front
speakers.
The bass sound of the
center channel is
output from the front
speakers (because a
small speaker cannot
produce enough
bass).
For “complete”
Dolby Pro Logic
Surround sound.
Select
PHANTOM
3 CH LOGIC
(3 Channel
Logic)
NORMAL
WIDE
