42
GB
Adjustments using the
CUSTOMIZE button
The CUSTOMIZE button allows you to make
the following adjustments.
1
Press CUSTOMIZE.
2
Press
or
to select the parameter
you want to adjust.
3
Turn the jog dial to select the setting
you want.
The setting is entered automatically.
4
Repeat steps 2 and 3 until you have set
all of the parameters that follow.
Initial settings
Parameter
Initial setting
MENU EXPAND XXX
OFF
2CH MODE
PL
MOVIE
SB DECODING XXXXXX AUTO
MULTI CH XXXXXXX
NONE
S. FIELD LINK XXX
ON
POWER SAVE XXX
OFF
AUTO FUNCTION XXX
ON
COMMAND MODE XXX
AV2
x
MENU EXPAND
Normally, set MENU EXPAND to “OFF”
(default setting). When set to “ON”, you can
select all adjustable parameters for SET UP,
SURR, LEVEL and EQ buttons and do the
advanced settings for each menu.
x
2ch decode mode (2CH MODE)
Lets you specify the type of decoding for the 2
channel source. This receiver incorporates with
Dolby Pro Logic II which has movie mode and
music mode, and the receiver can reproduce the
2 channel sound in 5.1 channel through Dolby
Pro Logic II.
• When set to “PRO LOGIC”, the receiver
performs the Pro Logic decoding. The source
recorded in 2 channel is decoded into 4
channels.
• When set to “PL II MOVIE”, the receiver
performs the Pro Logic II movie mode
decoding. This setting is ideal for the movies
encoded in Dolby Surround. Besides, this mode
can reproduce the sound in 5.1 channel when
watching the videos of old movies or in the
dubbed language.
• When set to “PL II MUSIC”, the receiver
performs the Pro Logic II music mode
decoding. This setting is ideal for the normal
stereo sources, such as CDs.
Notes
• Dolby Pro Logic II does not function for DTS or
MPEG format signals.
• “2CH MODE” only appears when you select
“NORMAL SURROUND” or “AUTO
DECODING”.
