65
GB
E
n
jo
ying
Surr
o
und S
ound
* You can select this sound field mode if the headphones are connected to the receiver.
Notes
• The sound fields for music and movies do not work
in the following cases.
– The multi-channel input is selected.
– DTS-HD signals with a sampling frequency of
more than 48 kHz are being received.
– Dolby TrueHD signals with a sampling
frequency of more than 96 kHz are being
received.
• If you set up the sound field during DTS 96/24
signal reception, the signal will be played back
only at 48 kHz.
• If you set up the sound field effect while the
receiver is receiving signals with a sampling
frequency of more than 48 kHz, the signals will
always be played back at either 44.1 kHz or
48 kHz.
• The effects provided by the virtual speakers may
cause increased noise in the playback signal.
• When one of the sound fields for music is selected,
no sound is output from the sub woofer if all the
speakers are set to “LARGE” in the Speaker
settings menu. However, the sound will be output
from the sub woofer if the digital input signal
contains L.F.E. signals, or if the front or surround
speakers are set to “SMALL,” the sound field for
movie is selected, or “Portable Audio” is selected.
Tips
• Sound fields with
DCS
marks use DCS
technology. See “Glossary” (page 120).
• When the sound field’s
DCS
mark is selected,
the Digital Cinema Sound lamp lights up on the
display.
To turn off the surround effect
for MOVIE/MUSIC
Select “2ch Stereo” or “A.F.D. Auto” in the
Surround settings menu.
Headphone*
Headphone (2ch)
This mode is selected automatically if you use headphones
when “2ch Stereo” mode or A.F.D. mode is selected. Standard
2 channel stereo sources completely bypass the sound field
processing and multi-channel surround formats are
downmixed to 2 channels.
Headphone Theater
DCS
This mode is selected automatically when you use headphones
when sound field is selected for movie/music. It allows you to
experience a theater-like environment while listening through
a pair of headphones.
Headphone (Direct)
Outputs the analog signals without processing by the tone,
sound field, etc.
Headphone (Multi)
This mode is selected automatically if you use headphones
when the multi-channel input is selected. Outputs the front
analog signals from the MULTI CHANNEL INPUT jacks.
Sound field
for
Sound field
Effect
Summary of Contents for STR-DG2100 - Multi Channel A/v Receiver
Page 134: ...134GB ...
