98
US
F:\Sony SEM
HA\Revision2_DG800\JC060412_2667346121DG800_US\2667346121\US05AMP_STR-DG800-
CEL.fm
masterpage: Left
STR-DG800
2-667-346-
12
(1)
Frequency response
Analog
10 Hz – 70 kHz,
+0.5/–2 dB (with sound
field and equalizer
bypassed)
Input
Analog
Sensitivity: 500 mV/
50 kohms
S/N
3)
: 96 dB
(A, 500 mV
4)
)
Digital (Coaxial)
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Digital (Optical)
S/N: 100 dB
(A, 20 kHz LPF)
Output (analog)
AUDIO OUT
Voltage: 500 mV/10 kohms
SUB WOOFER
Voltage: 2 V/1 kohm
Equalizer
Gain levels
±10 dB, 1 dB step
3)
INPUT SHORT (with sound field and equalizer
bypassed).
4)
Weighted network, input level.
FM tuner section
Tuning range
87.5 – 108.0 MHz
Intermediate frequency
10.7 MHz
Useable sensitivity
11.2 dBf, 1 µV/75 ohms
S/N
Mono/Stereo:
76 dB/70 dB
Harmonic distortion at 1 kHz
Mono/Stereo:
0.3%/0.5%
Separation
45 dB at 1 kHz
Frequency response 30 Hz – 15 kHz,
+0.5/–2 dB
AM tuner section
Tuning range
Intermediate frequency
450 kHz
Usable sensitivity
50 dB µ/m (at 1,000 kHz or
999 kHz)
5)
You can change the AM tuning scale to 9 kHz or
10 kHz. After tuning in any AM station, turn off
the receiver. While holding down CATEGORY
MODE, press
?/1
. All preset stations will be
erased when you change the tuning scale. To reset
the scale to 10 kHz (or 9 kHz), repeat the
procedure.
Video section
Inputs/Outputs
Video:
1 Vp-p/75 ohms
S-video:
Y: 1 Vp-p/75 ohms
C: 0,286 Vp-p, 75 ohms
COMPONENT VIDEO:
Y: 1 Vp-p/75 ohms
P
B
/C
B
/B-Y: 0.7 Vp-p/
75 ohms
P
R
/C
R
/R-Y: 0.7 Vp-p/
75 ohms
80 MHz HD Pass Through
Area Tuning
scale
code
10 kHz step
9 kHz step
U, CA
530 – 1,710 kHz
5)
531 – 1,710 kHz
5)
US01COV_STR-DG800-CEL.book Page 98 Tuesday, March 14, 2006 3:53 PM
