background image

2

GB

D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB02REG_STR-DH130-
U2.fm4-294-472-

11

(1)

masterpage: Left

STR-DH130

4-294-472-

11

(1)

To reduce the risk of fire or electric 
shock, do not expose this apparatus to 
rain or moisture.

To reduce the risk of fire, do not cover the 
ventilation opening of the apparatus with 
newspapers, tablecloths, curtains, etc. Do not place 
the naked flame sources such as lighted candles on 
the apparatus.

Do not install the appliance in a confined space, such 
as a bookcase or built-in cabinet.

To reduce the risk of fire or electric shock, do not 
expose this apparatus to dripping or splashing, and 
do not place objects filled with liquids, such as 
vases, on the apparatus.

As the main plug is used to disconnect the unit from 
the mains, connect the unit to an easily accessible 
AC outlet. Should you notice an abnormality in the 
unit, disconnect the main plug from the AC outlet 
immediately.

Do not expose batteries or apparatus with battery-
installed to excessive heat such as sunshine, fire or 
the like.

The unit is not disconnected from the mains as long 
as it is connected to the AC outlet, even if the unit 
itself has been turned off.

Excessive sound pressure from earphones and 
headphones can cause hearing loss.

This symbol is intended to alert 
the user to the presence of the Hot 
Surface that may be hot if it is 
touched during the normal 
operation.

For customers in the United 
States

Owner’s Record

The model and serial numbers are located on the rear 
of the unit. Record these numbers in the space 
provided below. Refer to them whenever you call 
upon your Sony dealer regarding this product.
Model No.                         Serial No.                        

 

This symbol is intended to alert the 
user to the presence of uninsulated 
“dangerous voltage” within the 
product’s enclosure that may be of 
sufficient magnitude to constitute a 
risk of electric shock to persons.

This symbol is intended to alert the 
user to the presence of important 
operating and maintenance 
(servicing) instructions in the 
literature accompanying the 
appliance.

Important Safety Instructions

1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in 

accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as 

radiators, heat registers, stoves, or other 
apparatus (including amplifiers) that produce 
heat.

9) Do not defeat the safety purpose of the polarized 

or grounding-type plug. A polarized plug has 
two blades with one wider than the other. A 
grounding type plug has two blades and a third 
grounding prong. The wide blade or the third 
prong are provided for your safety. If the 
provided plug does not fit into your outlet, 
consult an electrician for replacement of the 
obsolete outlet.

10)Protect the power cord from being walked on or 

pinched particularly at plugs, convenience 
receptacles, and the point where they exit from 
the apparatus.

11)Only use attachments/accessories specified by 

the manufacturer.

WARNING

Summary of Contents for STR-DH130





































Reviews: