background image

2

GB

D:\NORM'S JOB\SONY HA\SO17_STR-DH190_PMRF1\STR-DH190 (PMRF

01)\4726907121_GB\020REG.fm4-726-907-

12

(1)

masterpage: Left

STR-DH190

4-726-907-

12

(1)

For the customers in the USA

Owner’s Record

The model and serial numbers are located on 
the rear of the receiver. Record the serial 
number in the space provided below. Refer to 
these numbers whenever you call upon your 
Sony dealer regarding this product.

Model No.    STR-DH190                                                                  

Serial No.                                                                       

To reduce the risk of fire or electric shock, 
do not expose this apparatus to rain or 
moisture.

To reduce the risk of fire, do not cover the 
ventilation opening of the appliance with 
newspapers, tablecloths, curtains, etc.
Do not expose the appliance to naked flame 
sources (for example, lighted candles).

To reduce the risk of fire or electric shock, do 
not expose this appliance to dripping or 
splashing, and do not place objects filled with 
liquids, such as vases, on the appliance.

Do not install the appliance in a confined 
space, such as a bookcase or built-in cabinet.

As the main plug is used to disconnect the 
unit from the mains, connect the unit to an 
easily accessible AC outlet. Should you notice 
an abnormality in the unit, disconnect the 
main plug from the AC outlet immediately.

The unit is not disconnected from the mains 
as long as it is connected to the AC outlet, 
even if the unit itself has been turned off.

CAUTION

Risk of explosion if the battery is replaced by 
an incorrect type.
Do not expose batteries or appliances with 
battery-installed to excessive heat, such as 
sunshine and fire.

CAUTION

HOT SURFACE

To reduce the risk of thermal 
burn hazard, do not touch the 
hot surface where this symbol is 
displayed.

FOR UNITED STATES CUSTOMERS. NOT 
APPLICABLE IN CANADA, INCLUDING 
IN THE PROVINCE OF QUEBEC.

POUR LES CONSOMMATEURS AUX 
ÉTATS-UNIS. NON APPLICABLE AU 
CANADA, Y COMPRIS LA PROVINCE DE 
QUÉBEC.

For the customers in the USA

This symbol is intended to alert 
the user to the presence of 
uninsulated “dangerous voltage” 
within the product’s enclosure 
that may be of sufficient 
magnitude to constitute a risk of 
electric shock to persons.

This symbol is intended to alert 
the user to the presence of 
important operating and 
maintenance (servicing) 
instructions in the literature 
accompanying the appliance.

Important Safety Instructions

1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. 

Install in accordance with the 
manufacturer’s instructions.

8) Do not install near any heat sources such 

as radiators, heat registers, stoves, or 
other apparatus (including amplifiers) that 
produce heat.

9) Do not defeat the safety purpose of the 

polarized or grounding-type plug. A 
polarized plug has two blades with one 
wider than the other. A grounding type 
plug has two blades and a third grounding 
prong. The wide blade or the third prong 
are provided for your safety. If the 
provided plug does not fit into your outlet, 
consult an electrician for replacement of 
the obsolete outlet.

10) Protect the power cord from being walked 

on or pinched particularly at plugs, 
convenience receptacles, and the point 
where they exit from the apparatus.

11) Only use attachments/accessories 

specified by the manufacturer.

WARNING

Summary of Contents for STR-DH190













































Reviews: