73
GB
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STR-
DH820-CEL.fm
masterpage: Right
STR-DH820
4-266-497-
11
(2)
Adju
stin
g Setti
ng
s
Notes
• This function is useful when you use a large LCD
or plasma monitor or a projector.
• This function does not work when “A. DIRECT” is
being used.
x
Dual Mono (Digital broadcast
language selection)
Lets you select the language you want when
you listen to the dual audio of a digital
broadcast when available. This feature only
functions for Dolby Digital sources.
•
MAIN/SUB:
Sound of the main language
will be output through the front left speaker
and sound of the sub language will be output
through the front right speaker
simultaneously.
•
MAIN:
Sound of the main language will be
output.
•
SUB:
Sound of the sub language will be
output.
HDMI Settings menu
You can make the required settings for
equipment connected to the HDMI jack.
x
Ctrl for HDMI (Control for HDMI)
Lets you turn the Control for HDMI function
on or off. For details, see “Preparing for the
“BRAVIA” Sync” (page 59).
•
ON
•
OFF
Note
When you set “Ctrl for HDMI” to “ON”, “Audio
Out” may be changed automatically.
x
Pass Through
Lets you output the HDMI signals to the TV
even when the receiver is in standby mode.
•
ON:
When the receiver is in the standby
mode, the receiver continuously outputs
HDMI signals from the receiver’s HDMI
TV OUT jack.
•
AUTO:
When the TV is turned on while the
receiver is in the standby mode, the receiver
outputs HDMI signals from the receiver’s
HDMI TV OUT jack. Sony recommends
this setting if you use a “BRAVIA” Sync
compatible Sony TV. This setting saves
power in the standby mode when compared
with the “ON” setting.
•
OFF:
The receiver does not output HDMI
signals when the receiver is in the standby
mode. Turn on the receiver to enjoy the
connected equipment’s source on the TV.
This setting saves power in the standby
mode when compared with the “ON”
setting.
Notes
• This function is not available when “Ctrl for
HDMI” is set to “OFF”.
• When “AUTO” is selected, it may take a little more
time for the image and sound to be output to the TV
than when “ON” is selected.
• When the receiver is in standby mode,
“A. STANDBY” appears on the display panel if
“Pass Through” is set to “AUTO” or “ON”.
However, “A. STANDBY” will disappear when
“Pass Through” is set to “AUTO” and no signals
are detected.
x
Audio Out
Lets you set the HDMI audio signals from the
playback equipment connected to the receiver
via an HDMI connection.
•
AMP:
The HDMI audio signals from the
playback equipment is only output to the
speakers connected to the receiver. Multi
channel sound can be played back as it is.
Note
Audio signals are not output from the TV’s
speaker when “Audio Out” is set to “AMP”.
continued
