43
US
Ge
tt
ing St
ar
te
d
* When the speaker(s) is (are) out of the phase,
“OUT” is displayed on the TV screen. The
“+” and “–” terminals of the speaker may be
connected the other way around.
However, depending on the speakers, “OUT”
appears on the TV screen even though the
speakers are connected properly. This is
because of the speakers’ specifications. In
this case, you can continue to use the
receiver.
3
Select “Save” in step 2 to save
the measurement result.
4
Press
V
/
v
repeatedly to select
the Auto Calibration Type, then
press .
Tip
The size of a speaker (“Large”/“Small”) is
determined by the low frequency characteristics.
The measurement results may vary, depending on
the position of the optimizer microphone and
speakers, and the shape of the room. It is
recommended that you follow the measurement
results. However, you can change those settings in
the Speaker Settings menu. Save the measurement
results first, then try to change the settings if you
want.
Distance
Displays the measurement
result for speaker distance.
Level
Displays the measurement
result for speaker level.
Exit
Exits the setting process
without saving the
measurement results.
Parameter
Explanation
Full Flat
Makes the measurement of
frequency from each speaker
flat.
Engineer
Sets the frequency to one that
matches that of the Sony
listening room standard.
Front
Reference
Adjusts the characteristics of
all the speakers to match the
characteristics of the front
speaker.
Off
Sets the Auto Calibration to
off.
Item
Explanation
Auto Cal. Type
Engineer
Front Reference
Off
Auto Calibration
RETURN
Full Flat
