65
US
Enj
o
yi
ng
Sur
round
Sound
Notes
• This function does not work in the following cases.
– DTS-HD signals with a sampling frequency of
more than 48 kHz are being received.
– Dolby TrueHD signals with a sampling
frequency of more than 48 kHz are being
received.
– “Analog Direct” is being used.
• The beginning of the sound stream may be dropped
out when Neural-THX
®
processing is turned on or
off.
Tips
• You can identify the encoding format of DVD
software, etc., by looking at the logo on the
package.
• When a multi channel signal is input, only Dolby
Pro Logic IIx decoding is effective.
• Neural-THX is effective when 2 channel or 5.1
channel signals are input.
If you connect a subwoofer
This receiver will generate a low frequency
signal for output to the subwoofer when there
is no LFE signal, which is a low-pass sound
effect output to a subwoofer from a 2 channel
signal. However, the low frequency signal is
not generated for “Neo:6 Cinema” or “Neo:6
Music” when all speakers are set to “Large”.
In order to take full advantage of the Dolby
Digital bass redirection circuitry, we
recommend setting the subwoofer’s cut off
frequency as high as possible.
1
Start playing a sound source
you want to listen to (CD, DVD,
etc.).
2
Press GUI MODE.
After “MENU ON” appears on the
display for a while, “GUI” appears and
the GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
3
Press
V
/
v
repeatedly to select
“Settings” then press
or
b
.
The Settings menu list appears on the TV
screen.
4
Press
V
/
v
repeatedly to select
“Surround”, then press
or
b
.
5
Press
V
/
v
repeatedly to select
“E.Sur Mode”, then press
.
The menu for surround sound effect
appears.
6
Press
V
/
v
repeatedly to select
the A.F.D. mode you want, then
press .
Setting a multi channel
surround sound effect
