80
US
In the video input/output conversion table classified by the menu
settings
a
: Video signals are up-converted and output through the video converter.
f
: The same type of signal as that of the input signal is output. Video signals are not converted.
X
: Video signals are not output.
a)
The resolution is set automatically, depending on the connected TV.
b)
When the TV is connected to jacks other than the HDMI jacks, 480/576i signals are output when “Resolution”
is set to “AUTO”.
c)
480/576p signals are output even if 480/576i is set.
d)
Video signals without copyright protection are output based on the settings menu. Video signals with
copyright protection are output as 480p.
Notes
• Video signals are not output from the COMPONENT VIDEO MONITOR OUT or MONITOR VIDEO OUT
jacks when the TV, etc., is connected to the HDMI OUT jack.
• If you select a resolution that the connected TV does not support in the “Resolution” menu, the images from
the TV cannot be output correctly.
• Converted HDMI image output signals do not support “x.v.Color”.
• Converted HDMI image output signals do not support Deep Color.
• When HDMI OUT jack is connected, there is no up-converted video signal output from COMPONENT
VIDEO MONITOR OUT jacks. The COMPONENT VIDEO MONITOR OUT jacks have the component
signal direct output only.
• This receiver do not support 1080p input signals. You cannot up-convert the video signals to 1080p using this
receiver.
x
Comp.Dec. (Component video decoder)
If the image is distorted when you connect to video game, set “Comp. Dec.” to “ON”. This setting
is only applicable for component video input signals.
• ON
• OFF
“Resolution”
menu setting
HDMI OUT
jack
COMPONENT
VIDEO
MONITOR OUT
jacks
MONITOR
VIDEO OUT
jack
DIRECT
Component video
X
f
X
Video
X
X
f
AUTO (initial
setting)
Component video
a
a)
a
b)
X
Video
a
a)
a
b)
f
480/576i
Component video
a
c)
a
X
Video
a
c)
a
f
480/576p
Component video
a
a
X
Video
a
a
f
720p, 1080i
Component video
a
a
d)
X
Video
a
a
d)
f
Input signals
Output from
