98
US
Before using S-AIR products, have the
following ready.
Confirm the wireless adapters
are inserted correctly
Insert the wireless adapters firmly to the depth
into the slots of the S-AIR main unit and sub
unit respectively.
Confirm that the S-AIR IDs of
the S-AIR main unit and sub unit
are the same
The default setting of the S-AIR IDs of the
S-AIR main unit and sub unit is “A”.
Depending on the S-AIR product, you can set
the S-AIR ID by the switch or the setup menu.
For details, refer to the operating instructions
of each S-AIR product.
S-AIR products use a radio frequency of
2.4 GHz. Certain electronic equipment or
other factors may cause lost connection or
instability in S-AIR reception.
• Electronic equipment influence
The following may cause interference or
cross talk.
– Cellular phones, cordless phones
– Wireless LAN, personal computers
– Game machines using radio signals
– Microwave ovens
• Other factors
The following may cause poor reception.
– Materials or structures, such as walls and
floors
– The location where an S-AIR product is
placed
When using S-AIR products, place them as
far as possible from the above electronic
equipment, or place where S-AIR reception
is stable.
To use S-AIR products (S-AIR
main unit and sub unit)
?/1
MASTER VOLUME
SPEAKERS
PHONES
2 CH/
A.DIRECT
A.F.D.
MOVIE
MUSIC
INPUT MODE
DIMMER
DISPLAY
VIDEO 2 IN
VIDEO
L AUDIO R
AUTO CAL MIC
MULTI CHANNEL DECODING
INPUT SELECTOR
MUTING
S-AIR sub unit
(S-AIR receiver)
S-AIR main unit
(this receiver)
S-AIR sub unit
(surround amplifier)
Room B
Room A
Insert firmly
About environments where
S-AIR products (S-AIR main unit
and sub unit) are used
