113
US
Ot
her
Oper
at
ions
1
Press the input button of the
playback component.
You can also use INPUT SELECTOR
+/– on the receiver.
2
Prepare the playback
component for playing.
For example, insert the video tape you
want to copy into the VCR.
3
Prepare the recording
component.
Insert a blank video tape, etc. into the
recording component (connected to
VIDEO 1 OUT jack) for recording.
4
Start recording on the
recording component, then
start playback on the playback
component.
Notes
• Some sources contain copy guards to prevent
recording. In this case, you may not be able to
record from the source.
• Only analog input signals are output from the
analog output jack (for recording).
• HDMI sound cannot be recorded.
Using a bi-amplifier
connection
If you are not using surround back speakers,
you can connect the front speakers to the
SPEAKERS SURROUND BACK/BI-AMP/
FRONT B terminals using a bi-amplifier
connection.
To connect speakers
Connect the jacks on the Lo (or Hi) side of the
front speakers to the SPEAKERS FRONT A
terminals, and connect the jacks on the Hi (or
Lo) side of the front speakers to the
SPEAKERS SURROUND BACK/FRONT B/
BI-AMP terminals.
Make sure that metal fittings of Hi/Lo attached
to the speakers have been removed from the
speakers. Not doing so may cause a
malfunction of the receiver.
Recording onto a recording
media
VIDEO
OUT
MONITOR
L
R
DIGITAL (ASSIGNABLE)
DC5V
0.7A MAX
HDMI
ANTENNA
DMPORT
IN 4
ASSIGNABLE (INPUT ONLY)
IN 3
IN 2
IN 3
IN 1
OUT
AM
Y
PB
/
CB
COMPONENT VIDEO
OUT
IN
PR
/
CR
IN 2
IN 1
MONITOR
OUT
SA-CD/CD/CD-R
VIDEO 1
IN
TV
AUDIO
IN
VIDEO
IN
SAT
AUDIO
OUT
AUDIO
OUT
VIDEO
OUT
OPTICAL IN
AUDIO
IN
VIDEO
IN
SUBWOOFER
AUDIO
IN
VIDEO
IN
BD
L
R
SAT IN
BD IN
DVD IN
OPTICAL
COAXIAL
ASSIGNABLE (INPUT ONLY)
TV
SIRIUS
L
R
L
R
SPEAKERS
CENTER
FRONT A
SURROUND BACK/
FRONT B/
BI-AMP
L
R
SURROUND
L
R
L
R
CENTER
FRONT A
SURROUND BACK/
FRONT B/
BI-AMP
L
R
SURROUND
(for AUDIO)
EZW
-T100
Hi
Lo
Hi
Lo
SPEAKERS
Front speaker
(R)
Front speaker
(L)
continued
