Sony STR-DN1010 - Multi Channel Av Receiver Operating Instructions Manual Download

Page: 29 / 136

D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm

masterpage: Right

STR-DN1010

4-174-068-

(1)

Co
nn
ecti

on
s

Notes on connecting cables

• Use a High Speed HDMI cable. If you use a

Standard HDMI cable, 1080p, Deep Color
(Deep Colour) or 3D images may not be
displayed properly.

• We do not recommend using an HDMI-DVI

conversion cable. When you connect an
HDMI-DVI conversion cable to a DVI-D
component, the sound and/or the image may
not be output. Connect other audio cords or
digital connecting cords, then set “Input
Assign” in the Input Option menu when the
sound is not output correctly.

Notes on HDMI connections

• An audio signal input to the HDMI IN jack

is output from the SPEAKERS jacks, HDMI
TV OUT jack and PHONES jack. It is not
output from any other audio jacks.

• Video signals input to the HDMI IN jack can

only be output from the HDMI TV OUT
jack. The video input signals cannot be
output from the VIDEO OUT jacks or
MONITOR OUT jacks.

• The audio and video signals of HDMI input

are not output from the HDMI TV OUT jack
while the GUI menu is displayed.

• When you want to listen to the sound from

the TV speaker, set “Audio Out” to
“TV+AMP” in the HDMI Settings menu
(page 98). If you cannot play back multi
channel audio source, set to “AMP”.
However, the sound will not output from the
TV speaker.

• DSD signals of Super Audio CD are not

input and output.

• Be sure to turn on the receiver when the

video and audio signals of a playback
component are being output to a TV via the
receiver. If you set “Pass Through” to
“OFF”, video and audio signals will not be
transmitted when the power is turned off.

• Audio signals (sampling frequency, bit

length, etc.) transmitted from an HDMI jack
may be suppressed by the connected
component. Check the setup of the
connected component if the image is poor or
the sound does not come out of a component
connected via the HDMI cable.

• Sound may be interrupted when the

sampling frequency, the number of channels
or audio format of audio output signals from
the playback component is switched.

• When the connected component is not

compatible with copyright protection
technology (HDCP), the image and/or the
sound from the HDMI TV OUT jack may be
distorted or may not be output.

In this case, check the specification of the
connected component.

• You can enjoy High Bitrate Audio (DTS-HD

Master Audio, Dolby TrueHD), multi
channel Linear PCM only with an HDMI
connection.

• Set the image resolution of the playback

component to more than 720p/1080i to
enjoy High Bitrate Audio (DTS-HD Master
Audio, Dolby TrueHD).

• The image resolution of playback

component may need certain settings be
made before you can enjoy multi channel
Linear PCM. Refer to the operating
instructions of the playback component.

• To enjoy 3D images, connect 3D-compatible

TV and video components (Blu-ray disc
player, Blu-ray disc recorder, “PlayStation
3”, etc.) to the receiver using High Speed
HDMI cables, put on 3D glasses, and then
play back a 3D-compatible content.

• Depending on the TV or the video

component, 3D images may not be
displayed. Check the 3D image formats
supported by the receiver (page 131).

• Not every HDMI component supports all

functions that are defined by the specified
HDMI version. For example, components
that support HDMI, version 1.4, may not
support Audio Return Channel (ARC).

• Refer to the operating instructions of each

connected component for details.