background image

63

GB

D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm

masterpage: Right

STR-DN1010

4-174-068-

11

(1)

 

 

 

T

u

n

e

r Op

era

tio

ns

To listen to the locked channels

1

Select a locked channel you want to 
listen to using Direct Tuning (page 60).

“Enter your 4-digit lock code.” appears.

2

Press SHIFT, then press the numeric 
buttons to enter your 4-digit lock code.

The channel is tuned in.

To cancel the Parental Lock

1

Select a channel you want to unlock 
using Direct Tuning (page 60).

2

Press TOOLS/OPTIONS.

The option menu appears.

3

Press 

V

/

v

 repeatedly to select 

“Parental Lock”, then press 

 or 

b

.

4

Press 

V

/

v

 repeatedly to select “OFF”, 

then press 

.

“Enter your 4-digit lock code.” appears.

5

Press SHIFT, then press the numeric 
buttons to enter your 4-digit lock code.

“The channel has been unlocked.” appears 
and the channel is unlocked.

Notes

• When you select a channel using Category Mode, 

locked channels are skipped.

• When the receiver is reset to the initial settings, the 

lock code returns to the default (0000), but the 
Parental Lock settings are not removed.

• You cannot preset locked channels. If you set the 

Parental Lock for a preset channel, the preset 
information for that channel returns to the default.

• You cannot set the Parental Lock for channel 0 and 

channel 184.

• You can set only one lock code on the receiver. 

You cannot set individual lock codes for each 
channel.

continued

Summary of Contents for STR-DN1010 - Multi Channel Av Receiver









































































































































Reviews: