78
GB
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm
masterpage: Left
STR-DN1010
4-174-068-
11
(1)
To use multiple S-AIR main
units
You can use multiple S-AIR main units by
setting a different ID for each component.
Sound transmission is established as follows
(example):
Notes
• Sources with copyright protection may not be
playable on S-AIR sub unit.
• If you have connected surround amplifier,
surround sound will not be output from S-AIR
main unit.
To establish sound transmission, you need to
set the same ID for your S-AIR main unit and
S-AIR sub unit.
However, if your neighbors have S-AIR
products and their IDs are the same as yours,
your neighbors could receive the sound of
your S-AIR main unit or vice versa.
To prevent this, you can pair the S-AIR main
unit with a specific S-AIR sub unit by
performing the pairing operation.
x
Before pairing
Sound transmission is established by the ID
(example).
x
After pairing
Sound transmission is established between the
paired S-AIR main unit and S-AIR sub unit(s)
only.
Pairing the S-AIR main unit with
a specific S-AIR sub unit
(Pairing operation)
ID A
ID A
ID B
ID A
ID B
S-AIR main unit
(this receiver)
Other S-AIR main
unit
S-AIR sub
unit
S-AIR sub
unit
S-AIR sub unit
ID A
ID A
ID A
Your room
S-AIR main unit
(this receiver)
S-AIR sub unit
S-AIR sub unit
Neighbor
ID A
ID A
Your room
S-AIR main unit
(this receiver)
S-AIR sub unit
S-AIR sub unit
Neighbor
No transmission
Pairing
