STR-DN1050
5
HDMI Video
Input/Output (HDMI Repeater block)
Format
2D
3D
Frame packing
Side-by-Side
(Half)
Over-Under
(Top-and-Bottom)
4096 × 2160p @ 59.94/60 Hz
a
1)
–
–
–
4096 × 2160p @ 50 Hz
a
1)
–
–
–
3840 × 2160p @ 59.94/60 Hz
a
1)
–
–
–
3840 × 2160p @ 50 Hz
a
1)
–
–
–
4096 × 2160p @ 23.98/24 Hz
a
2)
–
–
–
3840 × 2160p @ 29.97/30 Hz
a
2)
–
–
–
3840 × 2160p @ 25 Hz
a
2)
–
–
–
3840 × 2160p @ 23.98/24 Hz
a
2)
–
–
–
1920 × 1080p @ 59.94/60 Hz
a
–
a
a
1920 × 1080p @ 50 Hz
a
–
a
a
1920 × 1080p @ 29.97/30 Hz
a
3)
a
a
3)
a
3)
1920 × 1080p @ 25 Hz
a
3)
a
a
3)
a
3)
1920 × 1080p @ 23.98/24 Hz
a
3)
a
a
3)
a
3)
1920 × 1080i @ 59.94/60 Hz
a
3)
a
a
3)
a
3)
1920 × 1080i @ 50 Hz
a
3)
a
a
3)
a
3)
1280 × 720p @ 59.94/60 Hz
a
3)
a
a
3)
a
3)
1280 × 720p @ 50 Hz
a
3)
a
a
3)
a
3)
1280 × 720p @ 29.97/30 Hz
a
3)
a
a
3)
a
3)
1280 × 720p @ 23.98/24 Hz
a
3)
a
a
3)
a
3)
720 × 480p @ 59.94/60 Hz
a
3)
–
–
–
720 × 576p @ 50 Hz
a
3)
–
–
–
640 × 480p @ 59.94/60 Hz
a
3)
–
–
–
1)
Supports YUV 4:2:0 / 8 bit format only.
2)
Supports 8 bit format only.
3)
These formats are also supported by an MHL connection.
MHL section
Supported MHL version
Incorporates MHL 2
Maximum current
900
mA
iPhone/iPad/iPod section
DC 5V 1.0 A MAX
USB works with iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s,
iPhone 4, iPhone 3GS, iPhone 3G, iPod touch (2nd through
5th generation), iPod classic, and iPod nano (3rd through 7th
generation).
Bluetooth
technology works with iPhone 5s, iPhone 5c, iPhone
5, iPhone 4s, iPhone 4, iPhone 3GS, and iPod touch (4th and 5th
generation).
AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3
or later, Mac with OS X Mountain Lion, and Mac and PC with
iTunes 10.2.2 or later.
You can use “SongPal” app with this receiver via
Bluetooth
or
network connection.
You can only charge the iPhone/iPod when they are connected to
the USB port while the receiver is turned on.
DLNA section
Supported format*
MP3 (MPEG 1 Audio Layer-3):
32 kbps – 320 kbps, VBR
AAC:
16 kbps – 320 kbps, CBR, VBR
WMA9 Standard:
40 kbps – 320 kbps, CBR, VBR
WAV:
32 kHz – 192 kHz, 16 bit PCM
32 kHz – 192 kHz, 24 bit PCM
FLAC:
44.1 kHz – 192 kHz, 16 bit FLAC
44.1 kHz – 192 kHz, 24 bit FLAC
AIFF:
32 kHz – 192 kHz, 16 bit PCM
32 kHz – 192 kHz, 24 bit PCM
ALAC:
32 kHz – 96 kHz, 16 bit ALAC
32 kHz – 96 kHz, 24 bit ALAC
DSD:
2.8 MHz, 1 bit DSD
* Compatibility with all encoding/writing software, recording
devices and recording media cannot be guaranteed.
USB section
Supported format*
MP3 (MPEG 1 Audio Layer-3):
32 kbps – 320 kbps, VBR
AAC:
16 kbps – 320 kbps, CBR, VBR
WMA9 Standard:
40 kbps – 320 kbps, CBR, VBR
WAV:
32 kHz – 192 kHz, 16 bit PCM
32 kHz – 192 kHz, 24 bit PCM
FLAC:
44.1 kHz – 192 kHz, 16 bit FLAC
44.1 kHz – 192 kHz, 24 bit FLAC
AIFF:
32 kHz – 192 kHz, 16 bit PCM
32 kHz – 192 kHz, 24 bit PCM
ALAC:
32 kHz – 96 kHz, 16 bit ALAC
32 kHz – 96 kHz, 24 bit ALAC
DSD:
2.8 MHz, 1 bit DSD
* Compatibility with all encoding/writing software, recording
devices and recording media cannot be guaranteed.
Supported USB device
Mass Storage Class, High-speed type
Maximum current
500
mA
NETWORK section
Ethernet LAN
10BASE-T/100BASE-TX
Wireless LAN
Compatible
standards:
IEEE 802.11 b/g
Security:
WEP 64 bit, WEP 128 bit, WPA/
WPA2-PSK (AES), WPA/WPA2-PSK (TKIP)
Radio frequency:
2.4
GHz
Bluetooth
section
Communication system
Bluetooth
Speci
fi
cation version 3.0
Output
Bluetooth
Speci
fi
cation Power Class 2
Maximum communication range
Line of sight approx. 10 m (33 feet)
1)
Frequency band
2.4 GHz band (2.4000 GHz – 2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible
Bluetooth
pro
fi
les
2)
A2DP (Advanced Audio Distribution Pro
fi
le)
AVRCP 1.3 (Audio Video Remote Control Pro
fi
le)
Supported Codecs
3)
SBC
4)
, AAC, aptX
Transmission range (A2DP)
20 Hz – 20,000 Hz (Sampling frequency 44.1 kHz)
1)
The actual range will vary depending on factors such as
obstacles between devices, magnetic
fi
elds around a microwave
oven, static electricity, cordless phone, reception sensitivity,
antenna’s performance, operating system, software application,
etc.
2)
Bluetooth
standard pro
fi
les indicate the purpose of
Bluetooth
communication between devices.
3)
Codec: Audio signal compression and conversion format
4)
Subband Codec
General
Power requirements
Area
Power requirements
US, Canadian
120 V AC, 60 Hz
Australian,
AEP, UK
230 V AC, 50 Hz
Power consumption
240
W
Power consumption (during standby mode)
0.3 W (When [Control for HDMI], [Pass Through],
[Network Standby]*, and [Bluetooth Standby] are set to
[Off], and the receiver in zone 2 is turned off.)
0.7 W (When [Control for HDMI] is set to [On], [Pass
Through], [Network Standby]*, and [Bluetooth Standby] are
set to [Off], and the receiver in zone 2 is turned off.)
1.3 W (When [Control for HDMI] and [Bluetooth Standby]
are set to [On], [Pass Through] and [Network Standby]* are
set to [Off], and the receiver in zone 2 is turned off.)
* US and Canadian models only.
Dimensions (width/height/depth) (Approx.)
430 mm × 172 mm × 329.4 mm
(17 in × 6 7/8 in × 13 in) including projecting parts and
controls
Mass (Approx.)
10.0 kg (22 lb 1 oz)
Design and speci
fi
cations are subject to change without notice.
Supplied accessories
• Startup Guide (1)
• Reference Guide (1)
• Remote control (1)
• R03 (size AAA) batteries (2)
• FM wire antenna (aerial) (1)
• AM loop antenna (aerial) (1)
• Optimizer microphone (1)
